News
  1 |  
In the factory of HEILA CRANES was done FAT of 2 cranes HLRM 35/5S bought by REMONTOWA SHIPBUILDING for new minedestroyers ORP ALBATROS and MEWA for Polish Navy. All tests were finished with positive result, (...)2021-02-02 09:19:26czytaj więcej...
We just finished the HAT tests of the HEILA HLRM 45/3S together with PRS and RPW inspectors on the 5th tugboat produced by REMONTOWA SHIPBUILDING for Polish Navy. After NAVHYD.COM trained the crew (...)2021-01-27 14:25:33czytaj więcej...
In 2017, NAVHYD.COM signed a contract with the REMONTOWA SHIPBUILDING shipyard for the delivery of 6 units HLRM 45 / 3S cranes, intended for installation on B860 line tugs. Currently next cranes are (...)2020-10-16 11:03:56czytaj więcej...
In June 2016, commissioning, HAT and SAT tests took place, as well as training in the operation of FLUIDMECANICA hydraulic winches delivered for the OCEANOGRAF unit built by SR NAUTA for the University (...)2020-10-16 10:49:39czytaj więcej...
In May 2016, commissioning, HAT tests and training of the crew on the operation of the HLRM 90/4S crane mounted on the BODO CONSTRUCTOR barge were carried out. The crane was delivered with a dedicated (...)2020-10-16 10:24:49czytaj więcej...
In the middle of december 2016 was done the commisioning of the NEXT :) hydraulic crane HLM 25 produced by HEILA for Polish Coast Guard. According to this action was done: - installation check - (...)2020-09-29 14:58:41czytaj więcej...
In the middle of 2016 were done sea trials of HLRM 35 cranes together with positioning systems and hydraulic winch provided by NAVHYD.COM for the Polish Navy. The devices were installed on ORP (...)2020-09-29 15:11:21czytaj więcej...
In the middle of december 2015 was done the commisioning of the hydraulic crane HLM 25 produced by HEILA for Polish Coast Guard. According to this action was done: - installation check - start-up of (...)2016-01-11 16:33:26czytaj więcej...
At 10-11 november 2015 at HEILA production plant were done the final load tests for crane HLM 25, which will be installed on the Polish Coast Guard vessel SG 311 KAPER. The tests were done by (...)2016-01-07 08:08:26czytaj więcej...
In the middle of september 2015 was done the FAT test for positioning system for vessels ORP MAĆKO and ZBYSZKO which belongs to Polish Navy. 1 set for 1 vessel are 4 units of the hydraulic capstans with (...)2016-01-12 10:04:51czytaj więcej...
At days 7-9 september 2015 in exhibitions center AMBEREXPO in Gdańsk were held exhibitons of maritime industry. NAVHYD.COM also were participated in BALTEXPO 2015. At Our stand we present the HEILA crane, (...)2015-09-10 18:17:42czytaj więcej...
At 6th and 7th august 2015 in the production plant of HELA CRANES SPA were done the finall load tests for 2 units of HLRM 35/2S cranes produced to be installed on Polish Navy vessels R14 and R15. These (...)2015-09-10 17:52:31czytaj więcej...
On 16 and 20 June 2015 were carried out to repairation of the control section for anchor winch on the unit KEY WEST. The scope of the repair consisted of: - dismantling of the control section - (...)2015-06-22 10:41:58czytaj więcej...
On 16-28 April 2015 at the SR NAUTA carried out on the unit HAPPY EAGLE: - repair of the hydraulic crane's winch: disassembly, replacement of winche's seals and drive, sandblasting, (...)2015-06-22 10:22:47czytaj więcej...
  1 |